For over 50 years, oil-flooded rotary screw compressors have been the workhorse of modern industry. Blackhawk Equipment partners with Sullair to deliver solutions that go beyond basic air compression. Our units feature US-engineered rotors and optimized air ends designed to lower your kW/cfm ratio—delivering maximum air power with minimum energy consumption.
Whether for general manufacturing, automotive, or heavy-duty industrial applications, our oil-flooded systems offer a maintenance-friendly design and some of the quietest dBA ratings on the market.
Standard on most models for long-term peace of mind.
10,000-hour non-varnishing, biodegradable fluid life.
Time-proven Sullair air end technology for superior longevity.
The SAV Series uses a combination of an external heat source and a blower to regenerate the desiccant material, using an average of only 2% of the process air. This three-tiered method helps optimize the drying process and maximize energy cost savings.
Flow Rate: 500 to 7500 cfm.
Dewpoint Performance: −40∘F/−40∘C.
Average Purge Air: 2%.
The SAH Series is an energy-efficient option that uses an external heat source to enhance the regeneration process. This method reduces process air loss, consuming an average of only 8% of the air during regeneration.
Flow Rate: 500 to 3000 cfm.
Dewpoint Performance: −40∘F/−40∘C.
Average Purge Air: 8%.
The SA Series uses a portion of dried process air to regenerate the desiccant material. This is an economical and reliable option for applications that require extremely low dewpoints.
Flow Rate: 55 to 3000 cfm.
Dewpoint Performance: −40∘F/−40∘C.
Average Purge Air: 15%.
The DMD Series is a compact and completely automatic desiccant dryer designed for point-of-use placement. Its modular design is ideal for smaller applications where space is a concern.
Offers dewpoint options of −4∘F (−20∘C) or −100∘F (−73∘C).
Flow Rate: 3 to 240 cfm.
Min/Max Operating Pressure: 58/232 psi.
Min/Max Inlet Air Temp: 50∘F/122∘F.
Sullair Refrigerated Compressed Air Dryers reliably remove harmful moisture and contaminants from compressed air, protecting your equipment and downstream tools from damage. They operate by chilling the air to a set dewpoint, which causes condensate to separate and be discharged from the system.
The SRD Series is ideal for operations with variable flow rates and fluctuating air demand. Its energy-saving cycling technology allows the refrigeration circuit to run intermittently, matching supply to demand and increasing energy efficiency while maintaining a stable dewpoint. These dryers also use the low-GWP refrigerant R513A.
The SRN Series is ideal for applications running at full capacity. These dryers maintain constant energy consumption and a stable dewpoint in varying operating conditions through a hot gas bypass system. The dryers utilize a low-GWP (Global Warming Potential) refrigerant, R513A.
Flow Rate: 10 to 6000 cfm.
Max Inlet Pressure: 232 psi (for models 10-175 cfm) and 203 psi (for models 200-6000 cfm).
Outlet Pressure Dew Point: 37−45∘F.
The Mojave Series offers a comprehensive lineup of industrial desiccant dryers, from heatless to blower purge models. Known for their “tank-tough” durability, these units are supported by Blackhawk Equipment’s factory-trained service, ensuring long-term reliability for manufacturing and oil field applications.
The SPX FLOW Heatless Desiccant Dryers are engineered to provide a constant supply of ultra-dry compressed air for critical applications. utilizing pressure swing adsorption (PSA) technology, these units effectively remove moisture to reliable dew points as low as -100°F (-73°C), making them ideal for electronics, pharmaceuticals, and food processing facilities.
Designed for high-capacity industrial environments, the SPX FLOW Heated and Blower Purge Dryers offer maximum energy efficiency by minimizing or eliminating the use of compressed air for regeneration. These units are perfect for large-scale operations requiring stable dew points and low operating costs over the equipment’s lifecycle.
The SPX Hankison Catalite® CBA Series represents the gold standard in breathing air purification, removing contaminants to meet strict international safety standards. By combining advanced desiccant drying with multi-stage filtration and catalytic conversion, it ensures air is safe for human consumption in hazardous environments.
Our selection of Membrane Air Dryers from SPX FLOW and BEKO offers a cost-effective, maintenance-free solution for point-of-use moisture protection. With no moving parts and no electricity required, these dryers are perfect for remote installations, mobile equipment, and laboratory environments.
Sullair’s filtration and mist elimination systems are designed to provide clean, dry compressed air, protecting both downstream equipment and production processes. The filter offerings are tailored for different application needs, from general-purpose protection to the removal of oil vapor for critical processes.
The Sullair OptimalAir® inlet filter is engineered to be the industry’s most efficient, capturing contaminants before they can reach the compressor. Its heavy-duty, high-capacity design protects internal components, extends compressor life, and reduces pressure drop to save on energy costs.
Superior Filtration: Provides 99.9% efficiency per ISO 5011, with a filtration capacity down to 0.4 micron.
Extended Lifespan: Its heavy-duty design holds up to five times more contaminant than conventional cellulose filters, which extends the life of internal components and compressor fluid.
Energy Savings: The low pressure drop throughout its operating life helps to reduce energy costs.
Sullair’s filtration series includes various models designed to meet specific air quality needs:
SF Series: This series includes General Purpose (SFGP), Fine Particulate (SFFP), Activated Carbon (SFAC), and Water Separation (SFWS) filters for a wide range of applications from 21 to 11,019 cfm.
FH Series: High-Pressure threaded filters, with flow rates from 60 to 1750 cfm.
High-Temperature Filters: These filters are available as threaded (FXFRHT) and flanged (FWFRHT) models, with flow rates from 25 to 17,700 cfm respectively.
Energy Efficiency: Engineered for energy efficiency, these filters help reduce operating costs through extremely low pressure drop.
High-Purity Air: The SF Series is designed for applications requiring the highest purity, such as Food & Beverage and Pharmaceuticals.
Durable Construction: The filter housings are built for corrosion resistance and are designed for safe and easy maintenance.
Advanced Design: Features a pleated filter design for maximum efficiency and extended filter life.
Sullair Mist Eliminators are designed for the bulk removal of condensate before compressed air enters the main filtration system.
Bulk Moisture Removal: Provides a crucial pre-filtration stage by removing large amounts of water and oil mist, reducing the load on downstream filters.
Durable Construction: The M Series eliminators are built to last and to operate in demanding environments.
Flow: 5 to 11,000 cfm.
Pressure: Up to 230 psi.
Sullair ELM Series Mist Eliminators provide reliable performance with extremely low pressure drop, helping to save energy and protect downstream equipment. They are designed for a longer service life with a strong stainless steel support sleeve construction.
Energy Savings: The element’s ultra-low differential pressure of 0.05 psi saves approximately 2% in compressor energy consumption.
Durable Construction: Features a strong stainless steel support sleeve to prevent rust and corrosion.
High-Capacity Element: The special, machine-pleated element construction provides 9-10x greater surface area and dirt-holding capacity compared to conventional media.
Flow Rates: Available from 21 to 17,700 cfm, depending on the model.
Maximum Operating Pressure: Up to 725 psi for High-Pressure filters.
Filtration Micron Rating: Down to 0.003 µm for activated carbon filters and 0.01 µm for fine particulate filters.
Operating Temperature: Maximum operating temperature of 350∘F for high-temperature filters.
Sullair’s filtration and mist elimination systems are designed to provide clean, dry compressed air, protecting both downstream equipment and production processes. The filter offerings are tailored for different application needs, from general-purpose protection to the removal of oil vapor for critical processes.
Sullair SP oil/water separators provide an easy, convenient, and cost-effective solution to filter condensate discharge and help keep your compressor room EPA compliant. This non-cartridge option uses molecular filtration and is designed to work with all compressor fluids, including polyglycol and silicone.
Maintenance-Free Design: The system is maintenance-free, with no pumps, sensors, or pre-separation filter pads. There are no messy elements to change, as the entire unit is replaced when full.
No Power Required: These units require no electricity to operate, further reducing costs.
Reliable Performance: Performance is not affected by specific gravity, emulsification, or relative humidity. The separators can manage all types of compressor fluids, including emulsified condensate.
Environmentally Friendly: Spent units can be disposed of at most sanitary landfills once excess liquid is drained.
Flow Rate: 20-3000 cfm.
Max Operating Pressure: 175 psi.
Max Condensate Temperature: 155∘F.
Oil Carryover: <10 ppm.
Remove condensate from compressors, dryers and filtration. They key is minimizing valuable compressed air loss. Drains often pay for themselves in less than a year.
Electric and pneumatic options to meet all sorts of applications including high and low pressure, high temperature, older systems containing rust and debris.
Sullimax™ Condensate Drains are engineered to reliably remove condensate from your compressed air system while providing maximum energy savings. These sensor-controlled drains are a “true zero loss” solution, helping to save both time and money on maintenance.
Zero-Loss Operation: Provides true zero loss for maximum energy savings.
High Reliability: Features an integrated sieve, eliminating the need for y-strainers and ensuring high reliability.
Sensor-Controlled: The drain is sensor-controlled and can automatically clear clogs and debris.
Easy Maintenance: Designed for low maintenance, making routine servicing fast and easy.
Integrated Alarm: Includes an integrated alarm with visual status indications on the drain itself. Remote access is also available.
Max Pressure: Up to 232 psi.
Flow Rate: Supports compressor flow rates up to 50,000 cfm, dryer flow rates up to 100,000 cfm, and filter flow rates up to 500,000 cfm.
Operating Temperature: The standard operating temperature ranges from 33∘F to 140∘F.
Voltage: Standard voltage is 95-240 VAC, 50/60 Hz. Optional voltages are also available.
Typical Application Areas: Can be used at the compressor, dryer, and filter.
The Drain-All® Condensate Handler is a specialized pneumatic trap designed to remove condensate from compressed air systems without losing valuable compressed air. Unlike standard drains, its robust design with large discharge pathways allows it to handle heavy loads of rust, scale, and debris without clogging, making it the most reliable solution for older or dirty systems.
A compressor is only the heart of the system. Protect your downstream equipment and ensure ISO 8573-1 compliance with our matched air treatment, storage, and distribution solutions.
Need emergency support? 303-975-8800
Hours: “Mon-Fri: 7am – 5pm MST | 24/7 On-Call”
